Hunting for a new construction electrician los angeles who can deliver a tight New Construction Electrical Installation—without delays or budget creep? Here’s the plan we use on real jobs: a clean path from preconstruction to final inspection, honest timelines, materials that pass the walk-through, and a mini case study. If you want design-build help, rough-in, low-voltage, solar-ready pathways, electrical panel upgrades, tik electric is the crew GCs call when the schedule is breathing down their necks—and the experience homeowners remember for the right reasons.

New builds are won (or lost) before drywall goes up. A sharp New Construction Electrical Installation turns “what if” into “all set.” We sync with your GC, designer, and inspector so the project flows: permit-ready plans, on-time rough, quiet trim, and signatures without the last-minute scramble.

Lock Your New-Build Electrical Schedule in Los Angeles

Code-clean New Construction Electrical Installation from plan set to final inspection—load calcs, panel maps, EV/solar readiness, and coordinated rough-to-trim. Built clean, built on time by Tik Electric—your go-to electrician los angeles (yes, the best electrician los angeles vibe).

Permit-ready one-lines & circuit schedules
Rough-in, low-voltage, and outdoor lighting
EV charger pathways & panel sizing—no surprise change orders

Call Now: (805) 300-2552 Request Plan Review & Estimate

Why builders and owners choose Tik Electric

Code-first, schedule-tight. We design to the California Electrical Code—and to what local inspectors actually expect—so rough passes on the first walk.
Design-build clarity. Load calcs, circuit schedules, panel maps, fixture counts—aligned with drawings and budget.
Future-proofed from day one. Conduit paths and panel space for solar, batteries, and EV charger installations.
One crew, full scope. Service mains, subpanels, lighting controls, low-voltage, site power, and outdoor lighting installation under one roof.

Our start-to-finish process

1) Preconstruction & permitting

Scope alignment: Appliance specs, EV readiness, smart zones, fixture intent.
Load calc: Right-size service; propose electrical panel upgrades only when the math says so.
Plan set & permits: Clean one-lines, panel schedules, fixture legends. We speak “inspector.”

2) Rough-in (walls open)

Home runs & pathways: Protected routes, correct plate drilling, documented fire-blocking.
Box placement that lives well: Code spacing plus real-life switch heights and outlet locations.
Low-voltage & network: Data, coax, cameras, doorbells, WAPs—laid out to avoid interference.
Site power: Stubs and conduit for gates, ADUs, and outdoor lighting installation.

3) Trim & commissioning

Devices that behave. Dimmers matched to LED drivers; AFCI/GFCI verified.
Labeling that saves time. Panel schedules that match reality.
Testing & balancing. Voltage drop checks, neutrals landed correctly, no nuisance trips.
Final inspection. We walk it with the inspector and close the loop.

Details that make the difference

EV-ready from day one: conduit to garage/drive, capacity reserved, correct breaker size.
Lighting that matches the render: Recessed spacing coordinated with beams and finish carpentry.
Quiet dimming, no flicker: We spec compatible dimmer/driver combos and document them.
Protection built in: Whole-home surge plus required AFCI—safer, quieter system.
Solar & battery prewire: Labeled conduit and clearances that make future installs painless.

Timeline snapshot

Precon & permits: 1–3 weeks (jurisdiction dependent)
Rough-in: 4–10 workdays, size/complexity driven
Trim & commissioning: 2–4 workdays
Closeout: Often the same week if scheduled early

Staying on schedule isn’t magic—it’s coordination, stable specs, and daily site notes that kill guesswork.

Mini case study: Two-story ADU + main-house refresh (Los Feliz)

A client needed a 650-sq-ft ADU with its own subpanel, while the main house got smart lighting. We reviewed the service (no upgrade required), set a 60A ADU subpanel, prewired for an EV and backyard outdoor lighting installation, and matched LED drivers to silent dimmers. Rough finished two days early; drywall started on time. Both rough and final passed on the first inspection. The EV outlet was live at move-in, and months later the homeowner added solar without touching the panel.

Transparent pricing drivers

Square footage & ceiling height (more ladder time, more fixtures)
Fixture complexity (smart scenes, keypads, specialty LEDs)
Panel location & service size (distance = conductor + labor)
Exterior scope (site lighting, gates, ADU feeders)
Changes late in the game (that “dim-to-warm” swap affects drivers and timing)

We flag impacts early, offer alternates, and update the plan set the same day decisions change.

Deliverables you actually use

Permit-ready plan support with AHJ-friendly details
As-built panel schedules and labeled circuits
Device legend (exact dimmers, drivers, control protocols)
Owner packet: Warranties, maintenance tips, recommended settings for comfort and efficiency

Related services for new builds

Bundle your project with electrical panel upgrades, EV charger installations, outdoor lighting installation, whole-home surge protection, structured cabling, and backup power prep—handled by tik electric, your go-to electrician los angeles and the bar many call the best electrician los angeles.